DESCRIPTION
Protectoseal Series No. 830E, Pressure / Vacuum Conservation Vent with Flame Arrester, is designed to prevent costly evaporation losses, tank burst due to over-pressure, and collapse due to vacuum. The flame arrester protects tank against fire and explosion caused by exterior sources of ignition. Pallets in the vent housing minimise air and vapour loss as the tank “breathes”. They open and close just enough to maintain safe working pressures and avoid damage to the tank. The flame arrester is mounted externally and is only exposed to vapours when venting.
• Sizes DN 50 (2″) through DN 150 (6″)
• Conforms to the latest ATEX Directive, ISO 16852
• Suitable for use with Explosive Group IIA (NEC Group D)
• Settings achieved by weight loading
• Operating temperatures up to +60°C (140°F)
• Extremely low leakage rates prior to set point
• Patented, FEP film “Air-Cushioned Seating”
• Low-leak pallet design – certified test reports
• Factory tested / certified for leakage and correct settings
• Available in Aluminium, Ductile Iron and Stainless Steel
